Precautions For Stereo Microscopes

Jan 05, 2025

Leave a message

When using a stereo microscope, you need to pay attention to the following points:

Carrying and storage: When taking or moving a stereo microscope, hold the bracket firmly with one hand and the base with the other hand to make the microscope vertical. Handle it with care to prevent it from falling from a height. The microscope should be stored in a dry, ventilated place, away from direct sunlight and moisture. It is best to put it in a dust cover to prevent dust from entering.

 

Cleaning and maintenance: After use, wipe the lens and body of the microscope with a soft cloth to keep it clean. Do not use organic solvents to wipe the lens to avoid damaging the lens coating. If there is dust on the lens, blow it off with an ear bulb, and then wipe it clean with a soft brush or special lens paper.

 

Lighting: Appropriate lighting can make the observed image clearer. It is recommended to use a combination of transmitted light and reflected light for lighting. The specific lighting method to be used needs to be determined according to the characteristics of the sample.

 

Magnification and focus adjustment: The magnification of a stereo microscope is usually between 10x and 100x. When observing, first use low magnification to find the target area, and then gradually increase the magnification for detailed observation. When adjusting the focus, the action should be gentle and slow to avoid damaging the sample or the microscope.

 

Pupillary distance adjustment: When using a stereo microscope, the pupil distance needs to be adjusted to obtain a clear image. By turning the two prism boxes, the exit pupil distance of the eyepiece tube is changed so that a completely overlapping circular field of view can be observed.

 

Avoid contamination: During operation, dirt or fingers should be avoided from contaminating the optical parts such as lenses and color filters. Do not touch the lenses of the stereo microscope with your hands or other dirty objects.

 

Temperature and humidity: The temperature of the microscope installation location should be between 0° and 40°, and the relative humidity should be <85%. The stereo microscope should be installed in a clean and dust-free place without vibration interference.

 

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!